To Space Recessed Lighting in Bedroom

May 13th

Recessed lighting in bedroom – Starting with measure the length and width of your bedroom. Draw your room shape on graph paper, using a square for every three inches (four slots per foot). Place a piece of tracing paper over your graph paper. Divide the space in the 4-foot squares (16 graph paper squares) for the A-type flood lamps or 3-foot squares (12 graph paper squares) to couple or R-type bulbs.

Square Recessed Lighting in Bedroom
Square Recessed Lighting in Bedroom

If your ceilings are higher or lower, divide your ceiling height with four. And then double the result to A-distance areas. For couples or R-type fixtures, divide your headroom 5.3, so doubling the result of the correct distance. Mark the center of each three or four-foot square with an “X”. Change your tracing paper so that your light is not more than two meters away from the wall with your closet. Make sure the recessed lighting in bedroom is centered between the two walls adjacent to the closet.

12 Photos Gallery of: To Space Recessed Lighting in Bedroom

Image of: Square Recessed Lighting in Bedroom
Image of: Simple Recessed Lighting in Bedroom
Image of: Rustic Recessed Lighting in Bedroom
Image of: Romantic Recessed Lighting in Bedroom
Image of: Pretty Recessed Lighting in Bedroom
Image of: Perfect Recessed Lighting in Bedroom
Image of: Endearing Recessed Lighting in Bedroom
Image of: Elegant Recessed Lighting in Bedroom
Image of: Decorate Recessed Lighting in Bedroom
Image of: Creative Recessed Lighting in Bedroom
Image of: Classy Recessed Lighting in Bedroom
Image of: Awesome Recessed Lighting in Bedroom
 

This distance will give the room with good general recessed lighting in bedroom to find and put away clothes, cleaning and other daily activities. Measure the distance of a light near a corner of the room from its two nearest walls on your drawing. Translate your spaces in feet. For example, nine squares are 2 meters and 3 inches. Measure and mark the position light to your ceiling with colored chalk then continue checking the rest of the lights based on your drawing positions.